As we all know inverter runs on a battery and it is the main component of the battery. The efficiency of the inverter depends on the battery. However, the battery requires regular maintenance and service to increase its durability and longevity. It also ensures the safety of the place where it is set up and it is also necessary for uninterrupted performance. The battery should be checked every two months in order to increase its performance and to stay updated about any faults.
If you are looking for an affordable inverter in Udaipur, your search ends at Vaibhav enterprises Udaipur. It is a top supplier of batteries and provides an affordable range of batteries and inverters. They also provide the facility of servicing your batteries and inverter. They offer trustworthy goods and reliable support information to the customers.
Tips To Enhance Your Inverter Battery Life
1. Install the Inverter Battery in a Place That Is Properly Ventilated
Always install an inverter battery in an open space or ventilated area because generally the inverter battery gets heated and gets warm due to charging and using. Open space helps the battery to cool down and reduce heating. Temperature swings may affect the battery life. Therefore battery should not be exposed to too high or cold temperatures.
2. Regularly check the ph level
Using float indicators, check the battery’s water level every two months. Do not use rainwater or distilled water as it consists of impurities that influence the battery’s performance. Wet cell batteries needed to be topped up with water regularly for systematic working. Water should be added after the battery is fully charged and should be filled up to the plates to increase the performance.
3. Keep the battery’s surface, sides, and terminal area clean
Always make sure that the surface of the battery and its sides are clean. Use a cotton cloth to wipe the battery. Lead sulfate is produced by the inverter battery during proper usage and is coated in the terminal area of the battery and the inverter resulting in increasing the electrical resistance of the current. Therefore it needs to be cleaned with warm water and a nylon brush. Battery terminals should also be protected from corrosion and rust as they may affect their durability and performance. Terminals should be clean with the use of hot water and baking soda.
4. Check for damaged wires
Always check for kink and crack in the wire as it may cause short circuits and other mishaps. Damaged wires also reduce the battery output and performance. You should always inspect and maintain wire health from time to time. Do not mix batteries of different ages, types, or sizes for optimum work.
5. Examine the input power line of the inverter
Check for the system if the mainline power cord is loosely plugged or if there is power in the wall socket. Voltage should also be checked and managed as too high or too low voltage may affect the battery. The use of energy-saving devices should be practiced, as it increases resistance and increases the load on the inverter.
For all your battery solutions and purchases visit Vaibhav enterprises that provide the best battery in Udaipur.